Norika PEX F5/F6 Series
One of the most popular and innovative options in the plumbing industry today, PEX pipes
are flexible and durable tubing which are suitable for residential or commercial usage. The
cross-linked polyethylene tubing are flexible enough to bend around corners unlike copper
and polyvinyl chloride piping.
Multilayer PEX Pipes
Norika® Multilayer PEX pipes feature three-layer tubing of
PEX-B for the outer and innermost layers with a middle layer
made of aluminum. The pipes are suitable for hot and cold
potable water applications as well as for underfloor heating
systems. They have an operating pressure of 10bar and
working temperature from 0°C to 70°C.
Flexible Sizing
From 16mm up to 75mm, with coil lengths of 200 meters (16mm and 20mm pipe size), 100 meters (25mm pipe size), 50 meters (32mm pipe size) and 5.8 meters(40mm up to 75mm pipe size)
Comply with PUB Requirements
BS EN ISO 21003-1: 2008 and BS EN ISO 21003-2: 2008+A1: 2011 for its performance test. Being non-metallic, it complies with SS 375: 2015 for suitability of use in contact with potable water.
PEX Push-Fit - Type F6
Norika® PEX Push-fit (Type F6) fittings can be used with both
multilayer and PEX pipes respectively. They can be adapted
for simultaneous usage with a PEX pipe on one end and
multilayer pipe on the other. Connecting Norika® PEX Push-fit
pipes is as easy as pushing the PEX pipe to the fittings. For
multilayer pipes, rounding is necessary before making the
connection.
Seven major parts
Collet, collet retainer, spacer, indicator ring, grab ring, seal ring and brass body. The spacer and grab ring work as double slip
prevention. The double-seal ring structure provides for better sealing performance enhancing the stability and security of the
connection. Even after joining with the pipes, these fittings are able to swivel for greater flexibility during installation.
Norika® PEX Push-fit (Type F6) fittings also come with a green display indicating that the pipe has been securely inserted.
Flexible Sizing
16mm, 20mm, 25mm and 32mm
PEX Press-Fit - Type F5
(Type F5) fittings use a pressfit type of connection and
therefore require a hand tool or pressfit machine for
installation.
Flexible Sizing
16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm and 75mm
Comply with PUB Requirements
Both Norika® PEX Push-fit (Type F6) and Norika® PEX Pressfit (Type F5) comply with standards BS EN ISO 21003-1:2008, BS EN
ISO 21003-2: 2008 + A1: 2011, BS EN ISO21003-3: 2008 and BS EN ISO 21003-5: 2008 for their performance capabilities
through tests on internal pressure, bending, pull-out, cyclic test and vacuum test. Both also comply with SS 375: 2015,
AS/NZS4020: 2005 and BS EN 12165: 2016 for suitability of use in contact with potable water.
Advantages of
PEX pipes and fittings
PEX pipes and fittings
Adaptable Bends around corners, no elbows needed
No Soldering No solder or glue required
Chemical Resistant Won't corrode or pit over time
Hot & Cold Rated O°C to 95°C range
Cost-Effective Fewer fittings, faster install
Energy Saving Reduced heat transfer
Quiet Minimizes water hammer noise
Discover Norika PEX Products